Inspection |
1. |
Ignition "ON" |
2. |
Using the scan tool. |
3. |
Emit intensive light toward photo sensor using a lamp, and check the output voltage change. |
4. |
The voltage will rise with higher intensive light and reduce with lower intensive light.
|
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
With the (-) driver, remove the photo sensor (A) from the center of defrost nozzle. |
3. |
Install in the reverse order of removal. |
Knee Airbag (KAB) Module Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
...
Hands Free Switch Schematic Diagrams
Circuit Diagram
...
Components and Components Location
Components
1. Telemetics Unit (TMU)2. AVN or Audio Head Unit3. Room Mirror Switch (Blue Link button, Center button, SOS button)4. Mic5. Roof Antenna (GPS+CDMA)
...