Inspection |
1. |
It will be able to diagnose defects of DDM/ADM with GDS
quickly. GDS can operates actuator forcefully, input/output value
monitoring and self diagnosis. |
2. |
Select model and "IPM". |
3. |
Select the "DDM" to check. |
4. |
Select "Input/output monitoring", if you will check current
data of power door lock system. It provides input/output status of
DDM/ADM. |
5. |
If you will check the power door lock operation forcefully, select "Actuation test". |
6. |
To check the DTC of the DDM/ADM module, select "Diagnostic trouble codes" |
Removal |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the front door trim panel.
|
3. |
Disconnect the power window switch module connector (A) from the wiring harness. |
4. |
Remove the power window switch module (B) from the door trim after loosening the mounting screws. |
Installation |
1. |
Install the power window switch module. |
2. |
Install the door trim panel after reconnecting the relevant connectors
|
Smart key unit Repair procedures
Removal
-
Take care not to scratch the crash pad and related parts
Smart key unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the accelerator pedal ...
Repair procedures
Inspection (With GDS)
1.
Check BCM input/output specification of multifunction switch
using the GDS. If the specification is abnormal, replace the lamp or
wiper switch.
2.
If diagnosis is ...
Brake Booster Components and Components Location
Components
1. Brake booster2. Master cylinder assembly3. O-ring
...