Removal and Installation |
1. |
Remove the battery and tray.
|
2. |
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner") |
3. |
Drain the coolant.
(Refer to Cooling System - "Coolant") |
4. |
Loosen the upper hose clip fixing bolt (A), and then remove the radiator upper hose (B) and lower hose (C).
|
5. |
Installation is reverse order of removal |
Knee Airbag (KAB) Module Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
...
Rear Pillar Trim Components and Components Location
Component Location
1. Rear pillar trim
...
Seat Belt Buckle Switch (BS) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front seat assembly.
(Refer to Body - "Front seat")
3.
Loosen th ...