Hyundai Azera: Rear Bumper Cover Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper Cover Repair procedures

Replacement

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

•	Put on gloves to protect your hands.

1.	Remove the luggage side trim. (Refer to "Trunk Trim")

2.	Disconnect the rear bumper main connector (A).

3.	Disconnect the connector (B), and then loosen the rear combination lamp mounting nuts.

4.	Remove the rear combination lamp (A).

5.	Remove the rear bumper lower mounting clips.

6.	Loosen the mounting bolts.

7.	After loosening the rear bumper side's mounting screws, then disconnect the side's.

8.	After loosening the mounting screw and clips, then remove the rear bumper cover (A).

9.

Installation is the reverse of removal.

•	Replace any damaged clips.

•	Make sure the connector is plugged in properly.

Rear Bumper Cover Components and Components Location

Component Location 1. Rear Bumper Cover ...

Front Seat

...

See also:

Description and Operation
Description Remote Keyless Entry System The described function is a radio-frequency remote control for central doors locking / unlocking, trunk release and Panic activity of an automotive vehi ...

Call History
Press the key Select [Call History] A list of incoming, outgoing and missed calls is displayed. Select the button to download the call history. 1) Call History : - Displays recent calls (ca ...

Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. To reduce the po ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com