Rear Combination Lamp (Outside) |
1. |
Disconnect the negative (-) battery terminal. |
2. |
If the bulbs should be only replaced without removing lamp assembly, replace the turn signal lamp bulb (A). |
3. |
Remove the nuts (4EA). |
4. |
Remove the rear combination lamp (A) after disconnecting the connector. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
If the bulbs should be only replaced without removing lamp
assembly, replace the back up lamp bulb (A) after removing the trim
cover in the trunk. |
3. |
Remove the rear garnish assembly (A). |
Installation |
1. |
Install the rear combination lamp assembly after assembling the bulb. |
Fuses
...
Rear Seat Belt Retractor Repair procedures
Replacement
•
When installing the belt, make sure not to damage the retractor.
1.
Remove the rear package tray trim.
(Refer to Interior Trim - "Rear Package Tray T ...
Tire Repair procedures
•
Using tires and wheel other than the recommended sizes could
cause unusual handling characteristics and poor vehicle control,
resulting in a serious accident.
Tire We ...