Replacement |
1. |
Remove the rear door module.
(Refer to Rear Door - "Rear Door Module") |
2. |
Disconnect the rear door latch connector (A). |
3. |
Remove the rear door latch assembly (A). |
4. |
Installation is the reverse of removal.
|
Rear Bumper Cover Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...
Specifications
Specifications
ItemSpecificationMaster cylinder
•
Type
•
I.D. mm(in)
•
Piston stroke mm(in)
•
Fluid level switch
?Fixed type 23.81 mm (0.937 in)45 ± 1 mm (1.77 ± 0.039 ...
Jack and tools
The jack, jack handle, wheel lug nut wrench are stored in the luggage compartment.
Pull up the luggage box cover to reach this equipment.
(1) Jack handle
(2) Jack
(3) Wheel lug nut wrench
Jacking ...