Replacement |
|
1. |
Using a screwdriver or remover, remove the rear frame inner cover (A). |
2. |
Remove the rear door inside handle cap (B), rear door cap (C), rear door cover (D). |
3. |
After loosening the mounting screws, then remove the rear door trim (A). |
4. |
Disconnect the rear door inside handle cage (A). |
5. |
Disconnect the connector (A). |
6. |
Installation is the reverse of removal.
|
Accelerator Position Sensor (APS) Schematic Diagrams
Circuit Diagram
...
AVN Head Unit Components and Components Location
Components
AVN (A/V & Navigation) Head Unit Connector
Pin No.DescriptionCommentsA1--A2PARKING_V_VIDEORear View Camera Video SignalA3PARKING_V_GNDRear View Camera Video GroundA4R/C_SHIELD G ...
Line Pressure Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...