Replacement |
1. |
Loosen the wheel lug nuts slightly.
Raise the vehicle, and make sure it is securely supported. |
2. |
Remove the rear wheel and tire (A) from front hub.
|
3. |
Loosen the bolt & nut and then disconnect the shock absorber (A) with the rear axle.
|
4. |
Loosen the rear upper arm bolts and nut and then remove the rear upper arm (A).
|
5. |
Disconnect the parking brake connector (A). |
6. |
Remove the brake caliper mounting bolts, and then hold the brake caliper assembly (A) with wire.
|
7. |
Loosen the disc mount screw and then brake disc (A).
|
8. |
Remove the wheel speed sensor (A) and brake hose.
|
9. |
Loosen the hub bearing mounting, and then remove the hub bearing (A) from knuckle.
|
10. |
Loosen the assist arm mounting nut and then remove the assist arm (A).
|
11. |
Loosen the trailing arm mounting nuts, and then remove the trailing arm (A),
|
12. |
Loosen the lower arm mounting bolt and nut and then remove the rear hub assembly (A).
|
Inspection |
1. |
Check the hub for cracks and the splines for wear. |
2. |
Check the brake disc for scoring and damage. |
3. |
Check the rear axle carrier for cracks. |
4. |
Check the bearing for cracks or damage.
|
Installation |
1. |
Installation is the reverse of removal.
|
Front Door Window Glass Components and Components Location
Component Location
1. Front door window glass
...
Repair procedures
Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left.
2.
Adjust the hood height by turning the hood overslam bumpers (C).
...
Camshaft Position Sensor (CMPS) Schematic Diagrams
Circuit Diagram
...