Hyundai Azera: Rear Seat Assembly Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Assembly Repair procedures

Replacement

1.

After loosening the mounting bolts, then remove the rear seat cushion assembly (A).

Tightening torque :

16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)

2.	Disconnect the rear seat cushion heater connector (A).

3.

After loosening the mounting bolts, then remove the rear seat back assembly (A).

Tightening torque :

16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)

4.	Disconnect the rear seat back heater connector (A) and airbag connector (B). [LH] [RH]

5.

Installation is the reverse of removal.

•	Make sure the connector is plugged in properly.

Rear Seat Assembly Components and Components Location

Component Location 1. Rear seat cushion assembly2. Rear seat back assembly ...

Rear Seat Back Cover Components and Components Location

Component Location 1. Rear seat back cover ...

See also:

CVVT (Continuously Variable Valve Timing) System Description and Operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by ...

Automatic turn off function (if equipped)
The interior lights automatically turn off approximately 20 minutes after the ignition switch is turned off. With the theft alarm system, the interior lights automatically turns off approximately 5 ...

Front Pillar Trim Components and Components Location
Component Location 1. Front pillar trim ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com