Replacement |
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
[LH]
[RH]
|
3. |
Installation is the reverse of removal. |
Passive Occupant Detection System (PODS-F) Repair procedures
Removal
PODS-F ECU
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front passenger seat assembly.
(Refer to Body - "Front s ...
Cylinder Block Components and Components Location
Components
1. Piston ring2. Piston3. Connecting rod4. Connecting rod upper bearing5. Piston pin6. Connecting rod lower bearing7. Connecting rod bearing cap8. Baffle plate9. Upper oil pan10. Cylin ...
Camshaft Position Sensor (CMPS) Specifications
Specification
ItemSpecificationOutput Voltage (V)High: 5.0VLow: 0.7VAir Gap (mm)0.5 ~ 1.5
...