Hyundai Azera: Rear Seat Cushion Cover Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Cushion Cover Repair procedures

Replacement

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

•	Put on gloves to protect your hands.

1.	Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")

2.	Remove the hog-ring clips (A).

3.	After removing the velcro tape (A) and hog-ring clips (B) on the rear of seat cushion and remove the rear seat cushion cover (C).

4.

Installation is the reverse of removal.

•	To prevent wrinkles, make sure the material is stretched evenly over the cover (B) before securing the hog-ring clips (A).

•	Replace the hog-ring clips with new ones using special tool [C (09880-4F000)].

Rear Seat Cushion Cover Components and Components Location

Component Location 1. Rear seat cushion cover ...

Rear Back Armrest Components and Components Location

Component Location 1. Rear back armrest ...

See also:

Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you drive and when you drive. Each of these factors affects how many miles you can get from a gallon of fuel. To opera ...

Fuel Filler Door Open Switch Repair procedures
Inspection 1. Open the junction box fuse cover. 2. Insert the hand to the junction box fuse cover hole and remove the crash pad side switch assembly (A) by pushing it. P ...

GAWR (Gross axle weight rating)
This is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the certification label. The total load on each axle must never exceed its GAWR. ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com