Hyundai Equus Manuals

Hyundai Azera: Rear Wheel Guard Repair procedures - Body Side Molding - Body (Interior and Exterior) - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Rear Wheel Guard Repair procedures

Replacement
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
Remove the rear tire.
2.
After loosening the mounting clips and nut, then remove the rear wheel guard (A).

3.
Installation is the reverse of removal.
   
Replace any damaged clips.
Front Wheel Guard Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Put ...

Front Mud Guard Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Put ...

See also:

Repair procedures
Service Point Target Auto Calibration (SPTAC) This procedure provides a way to calibrate the camera by having the service technician align the car to a well lit simulated straight road target; ...

Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures recomm ...

Relay Box (Passenger Compartment) Repair procedures
Fuse Inspection 1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2. Are the fuse capacities for each circuit correct? 3. Are there any blown fuses? I ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com