Replacement |
1. |
Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser.
|
2. |
Remove the desiccant (A) from condenser using a long nose plier. Check for crumbled desiccant and clogged bottom cap filter. |
3. |
Apply air conditioning compressor oil along the O-rings and threads of the new bottom cap. |
4. |
Insert the new desiccant into the receiver drier tank. The
desiccant must be sealed in vacuum before it is exposed to air for use. |
5. |
Install the new bottom cap to the condenser.
|
Rear Pillar Trim Components and Components Location
Component Location
1. Rear pillar trim
...
Description and Operation
Description
Windshield deicer system prevent windshield wiper from
freezing in the winter season. It consists of deicer in the lower part
of windshield, switch and relay. IPM receives an input ...
Oil Pan Components and Components Location
Components
1. Upper oil pan2. Lower oil pan3. Drain plug4. Drain plug gasket
...