All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than 1 mile (1.6 km).
Recommended pressures must be maintained for the best ride, top vehicle handling, and minimum tire wear.
For recommended inflation pressure, refer to “Tire and wheels” in section 8.
All specifications (sizes and pressures) can be found on a label attached to the vehicle.
WARNING - Tire under inflation
Inflate your tires consistent with the instructions provided in this manual. Severe underinflation can lead to severe heat build-up, causing blowouts, tread separation and other tire failures that can result in the loss of vehicle control leading to severe injury or death. This risk is much higher on hot days and when driving for long periods at high speeds.
WARNING - Tire Inflation
Overinflation or underinflation can reduce tire life, adversely affect vehicle handling, and lead to sudden tire failure. This could result in loss of vehicle control and potential injury.
Always observe the following:
Illuminated ENGINE START/STOP button (if equipped)
Whenever the front door is opened, the ENGINE START/STOP button will illuminate
for your convenience. The light will go off after about 30 seconds when the door
is closed. It will also go off immedi ...
Using My Music Mode
Playing/Pausing My Music Files
While playing, press the key to
pause and press again to play.
✽ NOTICE
If there are no files saved within My Music, the
button will be disabled.
Changi ...
Engine Mounting Components and Components Location
Components
1. Transaxle mounting bracket2. Roll road bracket3. Sub frame4. Engine mounting bracket5. Engine mounting support bracket
...