Description |
1. |
Description : It cuts automatically power to the load to reduce parastic current draw. |
2. |
IPM had 3 modes, "Normal Mode", "Sleep Mode", "Power Off Mode". Auto cut of dark current practice in "Sleep Mode".
|
3. |
The explanation - The auto cut of dark current
|
4. |
Problem when fuse switch setting is wrong
: If a fuse switch is set to OFF(Before delivering to
customer) by a customer or technician and auto cut function of dark
current activates, below problems may happen.
*If mode switch OFF(before delivering to customer) is set, power of BCM, Digital clock and audio is shut off. |
TJ Joint Repair procedures
Replacement
•
Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease.
•
The boot band should be replaced with a new on ...
Compressor Repair procedures
Removal
1.
If the compressor is marginally operable, run the engine at
idle speed, and let the air conditioning work for a few minutes, then
shut the engine off.
2.
Disconnect the negati ...
Trunk room lamp
The trunk room lamp comes on for 20 minutes when the trunk is opened. ...