Hyundai Azera: Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Fender / Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Fender / Repair procedures
| Replacement |
|
| 1. |
Remove the head lamps.
|
| 2. |
Loosen the mud guard mounting screws.
|
| 3. |
After loosening the mounting screws and clips, then remove the side sill molding (A).
|
| 4. |
Using a screwdriver or remover, remove the fender garnish (A).
|
| 5. |
Detach the clips and then remove the fender side cover (A).
|
| 6. |
Using a screwdriver or remover, remove the delta garnish (A).
|
| 7. |
After loosening the mounting screws and bolt, then remove the front bumper side mounting bracket (A).
|
| 8. |
After loosening the fender mounting bolts and nut, then remove the fender (A).
|
| 9. |
Installation is the reverse of removal. |
Components and Components Location
Component Location
1. Fender
...
Hood
...
See also:
Fuel Tank Pressure Sensor (FTPS) Schematic Diagrams
Circuit Diagram
...
Changing the engine oil and filter
Have engine oil and filter changed by an authorized HYUNDAI dealer according
to the Maintenance Schedule at the beginning of this section.
WARNING - California proposition 65
Engine oil contains ch ...
(if equipped)
The system has been equipped with a rear view camera for user safety by
allowing a wider rear range of vision.
The rear view camera will automatically operate when the ENGINE START/STOP
butto ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com