Hyundai Equus Manuals

Hyundai Azera: Repair procedures - Ignition System - Engine Electrical System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Repair procedures

On-vehicle Inspection
Spark Test
1.
Remove the ignition coils.
(Refer to Ignition System - "Ignition Coil")
2.
Using a spark plug socket, remove the spark plug.
3.
Install the spark plug to the ignition coil.
4.
Ground the spark plug to the engine.

5.
Check if spark occurs while engine is being cranked.
   
To prevent fuel being injected from injectors while the engine is being cranked, disconnect the injector connector.
Crank the engine for no more than 5 ~ 10 seconds.
6.
Inspect all the spark plugs.
7.
Using a spark plug socket, install the spark plug.
8.
Install the ignition coil.
9.
Reconnect the ignition coil connector.

Description and Operation
Description Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are preprogrammed in ...

Ignition Coil Components and Components Location
Components 1. Condensor2. Bracket3. Ignition coil4. Ignition coil harness ...

See also:

Timing Chain Cover Repair procedures
Removal 1. Remove the LH/RH cylinder head cover. (Refer to Cylinder Head Assembly - "Cylinder Head Cover") 2. Remove the lower oil pan. (Refer to Lubrication System - "Oil Pan") 3. Rem ...

Checking the washer fluid level
Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics ...

Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improve ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com