Hyundai Azera: Repair procedures
| Adjustment |
| Transaxle Control Module(TCM) Learning |
When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed.
In the following case, TCM learning is required.
| • |
Transaxle assembly replacement |
| • |
TCM replacement |
| • |
TCM upgrading
|
| TCM learning procedure |
| 1. |
ATF temperature: 40~100°C (104~212°F) |
| 2. |
Static learning
Repeat the below shift pattern four times or more with stepping on the brake.
|
| 3. |
Driving learning
Drive the vehicle from a stop in D through all gears 1st,
2nd, 3rd, 4th, 5th and 6th gear while holding the throttle steady at the
specified TPS value (15~25%). |
Description and Operation
Description
Automatic transaxle system relies on various measurement data
to determine the current control status and extrapolate the necessary
compensation values. These values are used to con ...
Schematic Diagrams
Circuit Diagram
...
See also:
Phone Menu Screen
Phone Menus
With a Bluetooth® Wireless Technology device connected, press the
key to display the Phone menu screen.
1) Favorite : Up to 20 frequently used contacts saved for easy access
2) Dial ...
General Safety Information and Caution
Instructions
When Handling Refrigerant
1.
R-134a liquid refrigerant is highly volatile. A drop on the
skin of your hand could result in localized frostbite. When handling the
refrigerant, be ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com