Removal and Installation |
1. |
Disconnect the over flow hose (A), and then remove the resorvior tank (B).
|
2. |
Installation is in the reverse order of removal. |
3. |
Fill the reservoir tank to the "F" line with coolant. |
Special Service Tools
Special Tools
Tool(Number and Name)IllustrationUse09495-3K000Band installerInstallation of ear type boot band09495-33000PullerRemove the spider assembly from the driveshaft
...
Immobilizer system
Your vehicle is equipped with an electronic engine immobilizer system to reduce
the risk of unauthorized vehicle use.
Whenever the ENGINE START/STOP button is changed to the ON position, the immobil ...
Description and Operation
Description
system outline
An optimal seat position set by a driver can be memorized in
Power seat unit by IMS SW, which enables restoration of seat position
set by the driver despite
Playi ...