Hyundai Equus Manuals

Hyundai Azera: Roller Blind Shoe Repair procedures - Panoramaroof - Body (Interior and Exterior) - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Roller Blind Shoe Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Panoramaroof / Roller Blind Shoe Repair procedures

Replacement
1.
Remove the roof trim assembly.
(Refer to Roof Trim - "Roof Trim Assembly")
2.
Remove the movable glass.
3.
After loosening the mounting TORX screws, remove the roller blind motor (A).

4.
After loosening the mounting TORX screws using a TORX wrench, remove the roller blind lower bracket (A).

5.
Remove the roll blind (A) by pulling it at a right angle.

   
•
When removing it, make sure that the edge (B) does not bump against the vehicle body because of the roller blind tension.
6.
Disengage the mechanism rail assembly (A) by releasing the mounting TORX screws.

7.
After loosening the mounting TORX screws, remove the roller blind deflection (A).

8.
Remove the roller blind cable (A) in the direction of arrow using a flat-head screwdriver.

   
•
When installing it, place the roller blind cable (A) in its original position.
9.
Remove the roller blind shoe (A) from the mechanism rail in the direction of arrow.

   
•
When installing it, take care not to damage the roller blind shoe.
10.
To install, reverse the removal procedure.
Panoramaroof Assembly Repair procedures
Removal 1. Remove the roof trim. (Refer to Roof Trim - "Roof Trim Assembly") 2. Remove the rear window glass. (Refer to "Rear Window Glass") 3. Remove the movable glass. (Refer to Panor ...

Mirror
...

See also:

Components and Components Location
Components 1. Main crash pad assembly2. Side speaker grille [LH]3. Center speaker grille4. Side speaker grille [RH]5. Alarm speaker assembly6. Center speaker assembly7. Photo sensor 8. Crash pad ...

Driver Airbag (DAB) Module and Clock Spring Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the driver airbag module mounting bolts (A). 3. Remove the wiring fix ...

Oil Cooler Components and Components Location
Components 1. Radiator2. Radiator mounting bracket3. Radiator cap4. Drain plug5. Mounting insulator ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com