Removal |
1. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
2. |
Remove the front seat assembly.
|
3. |
Loosen the seat belt buckle mounting bolt and remove the seat belt buckle switch (A). |
Installation |
Be sure to install the harness wires so they will not pinch or interfere with other parts.
|
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
3. |
Install the seat belt buckle switch.
|
4. |
Install the front seat assembly.
|
5. |
Reconnect the battery negative cable. |
6. |
After installing the seat belt buckle switch, confirm proper system operation:
|
Fuel Pressure Control Valve (FPCV) Schematic Diagrams
Circuit Diagram
...
Air bag
(1) Driver’s front air bag
(2) Passenger’s front air bag
(3) Side impact air bag
(4) Curtain air bag
(5) Driver’s knee air bag
WARNING - Seat belts
Even in vehicles with air bags, you and yo ...
Erasing HomeLink® buttons
Individual buttons cannot be erased. However, to erase all three programmed buttons:
1. Press and hold the two outer HomeLink® buttons until the indicator light begins
to flash after 10 seconds.
2. ...