Removal |
1. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
2. |
Left side - Remove the seat belt lower anchor cover (A).
After loosening the mounting bolt, then remove the seat belt lower
anchor (B).
Right side - To remove the seat belt anchor pretensioner (C),
keep on pushing the lock pin (A) as arrow direction. And then remove
the seat belt after pushing the lock pin (B). |
3. |
Remove the door scuff trim.
|
4. |
Remove the center pillar trim.
|
5. |
Remove the upper anchor bolt. |
6. |
Disconnect the seat belt pretensioner connector (C). |
7. |
Loosen the seat belt pretensioner mounting bolts (A,B) and remove the seat belt pretensioner. |
Installation |
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least three minutes. |
3. |
Install the seat belt pretensioner with a bolts (A,B).
|
4. |
Connect the seat belt pretensioner (BPT) connector (A). |
5. |
Install the upper anchor bolts.
|
6. |
Install the center pillar trim.
|
7. |
Install the door scuff trim.
|
8. |
Left side - Install the lower anchor bolts.
Right side - Insert the seat belt to the anchor pretensioner (A).
|
9. |
Reconnect the battery negative cable. |
10. |
After installing the seat belt pretensioner, confirm proper system operation:
|
Description and Operation
Description
system outline
An optimal seat position set by a driver can be memorized in
Power seat unit by IMS SW, which enables restoration of seat position
set by the driver despite
Playi ...
Rear Disc Brake Repair procedures
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Loosen the bolt & nut and then disconnect the shock absorbe ...
Components and Components Location
Components
1. Headrest2. Headrest guide3. Front seat back cover4. Front seat back pad5. Front seat back warmer6. Front seat back board7. Front seat back frame assembly8. Front seat cushion frame ...