Hyundai Azera: Shift Lever Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Lever Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Lever Repair procedures
| Removal |
| 1. |
Remove the center console assembly.
|
| 2. |
Remove the duct (A).
|
| 3. |
Disconnect sports mode connector (A).
|
| 4. |
Remove the shift cable (B).
|
| 5. |
Remove the wiring (A).
|
| 6. |
Remove the shift lever assembly (B) by removing the bolts (A-4ea).
|
| 7. |
Installation is the reverse of removal.
|
Shift Lever Components and Components Location
Components
1. Shift lever knob2. Shift lever assembly 3. Control cable assembly4. Manual control lever (T/M side)
...
Shift Cable Components and Components Location
Components
1. Shift lever knob2. Shift lever assembly 3. Control cable assembly4. Manual control lever (T/M side)
...
See also:
Schematic Diagrams
MDPS Circuit Diagram
Harness Connector
TypePin NoDescriptionBattery1Battery +2Battery -Vehicle1IGN2-3-4-5-6-7High_CAN8Low_CAN
...
Accelerator Position Sensor (APS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Specification: Refer t ...
Trunk
...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com