Removal |
1. |
Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. |
2. |
Remove the front seat assembly.
|
3. |
Remove the seat back assembly.
|
1. |
Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. |
2. |
Remove the rear seat cushion.
|
3. |
Remove the rear seat back assembly.
|
Installation |
Be sure to install the harness wires so they will not pinch or interfere with other parts. |
|
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least three minutes. |
3. |
Install the new seat back assembly. |
4. |
Install the front seat assembly.
|
5. |
Recline and slide the front seat forward fully, make sure the harness wires are not pinched of interfere with other parts. |
6. |
Reconnect the battery negative cable. |
7. |
After installing the side airbag (SAB), confirm proper system operation:
|
Be sure to install the harness wires so they will not pinch or interfere with other parts. |
|
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least three minutes. |
3. |
Install the new rear seat back assembly.
|
4. |
Install the rear seat cushion.
|
5. |
Reconnect the battery negative cable. |
6. |
After installing the side airbag (SAB), confirm proper system operation:
|
Front Strut Assembly Components and Components Location
Components
1. Dust cover2. Upper locking nut3. Self locking nut4. Space5. Insulator6. Spring upper seat7. Spring upper pad8. Strut dust cover & Bumper rubber9. Coil spring10. Spring lower pad ...
Compass function
The Compass can be turned ON and OFF and will remember the last state when the
ignition is cycled. To turn the display feature ON/OFF:
1. Press and release the button within 1 second to turn the ...
Flow Diagram
Power Flow Chart
P,NUD/BLR/B26/B35R/COD/COWC?
? Direction of Rotation
?Lower & Reverse Brake (LR/B) Activation > Overdrive (O/D) Hub Lock > Mid & Rear P/C Lock
?Input Shaft Rotatio ...