Hyundai Azera: Side Sill Molding Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Body Side Molding / Side Sill Molding Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Body Side Molding / Side Sill Molding Repair procedures
| Replacement |
|
| 1. |
Loosen the mounting screws. |
| 2. |
Using a screwdriver or remover, remove the side sill molding (A). |
| 3. |
Installation is the reverse of removal.
|
Waist Line Molding Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...
Panoramaroof
...
See also:
Tilting the sunroof
When the sunshade is closed
If you push the sunroof control lever upward, the sunshade will slide all the
way open then the sunroof glass will tilt.
To stop the sunroof movement at any point, p ...
Components and Components Location
Components Location
1. PCV Valve2. Canister3. Purge Control Solenoid Valve (PCSV)4. Fuel Tank Pressure Sensor (FTPS)5. Canister Close Valve (CCV)6. Fuel Level Sensor (FLS)7. Fuel Tank Air Filt ...
Oil Pressure Switch Components and Components Location
Components
1. Oil cover2. Oil cover gasket3. Oil pressure switch
...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com