Removal |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the main crash pad.
|
3. |
Remove the interior 1 antenna (A) after disconnecting the connector and loosening the mounting nuts (2EA). |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the center console.
|
3. |
Remove the interior 1 antenna (A) after loosening the mounting nuts (2EA). |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the trunk transverse trim.
|
3. |
Disconnect the trunk antenna connector (A) and remove the trunk antenna (B) after loosening screws (2EA). |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the rear bumper.
|
3. |
Disconnect the exterior bumper antenna connector on rear bumper center part. |
4. |
Disconnect the antenna connector and remove the exterior bumper antenna (A) after loosening the screws (2EA). |
Installation |
1. |
Install the interior 1 antenna. |
2. |
Install the main crash pad. |
3. |
Install the negative (-) battery terminal and check the smart key system. |
1. |
Install the interior 2 antenna. |
2. |
Install the center console. |
3. |
Install the negative (-) battery terminal and check the smart key system. |
1. |
Install the trunk antenna. |
2. |
Install the trunk tranverse trim. |
3. |
Install the negative (-) battery terminal and check the smart key system. |
1. |
Install the exterior bumper antenna. |
2. |
Install the rear bumper. |
3. |
Install the negative (-) battery terminal and check the smart key system. |
Seat Heater Repair procedures
Inspection
First Seat Heater
1.
Check for continuity and measure the resistance between No.1 and NO.4 terminals.
No.DescriptionNo.Description1Heater (+)3NTC (-)2NTC (+)4Heater (-)
Standar ...
Closing the fuel filler lid
1. To install the cap, turn it clockwise until it clicks one time. This indicates
that the cap is securely tightened.
2. Close the fuel filler lid and push it lightly and make sure that it is secure ...
Trunk Lid Assembly Repair procedures
Replacement
•
When removing and installing the trunk lid, an assistant is necessary.
•
Wear gloves to protect hands from injury.
1.
After loosening the mountin ...