Hyundai Azera: Spark Plug Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Electrical System / Ignition System / Spark Plug Repair procedures

Removal and Installation

1.	Remove the ignition coils. (Refer to Ignition System - "Ignition Coil")

2.

Using a spark plug socket, remove the spark plug.

Tightening torque :

14.7 ~ 24.5N.m (1.5 ~ 2.5kgf.m, 10.8 ~ 18.1lb-ft)

Be careful that no contaminates enter through the spark plug holes.

3.	Installation is reverse order of removal.

Inspection

1.

Inspect the electrodes (A) and ceramic insulator (B).

Inspection Of Electrodes

Condition

Dark deposits

White deposits

Description

-	Fuel mixture too rich

-	Low air intake

-	Fuel mixture too lean

-	Advanced ignition timing

-	Insufficient plug tightening torque

2.

Check the electrode gap (A).

Standard :

1.0 ~ 1.1 mm (0.0394 ~ 0.0433 in.)

Spark Plug Components and Components Location

Components 1. Spark plug ...

Charging System

...

See also:

Air Ventilation Seat Description and Operation
Description Using the blows power of FAN on seat, remove the moisture, sweat and warmth from occupants and surface of seats. It inhales the indoor air through the blower installed at the seat cu ...

Troubleshooting
Troubleshooting ProblemPossible causeSolutionNot pairingBluetooth device of Car is not discoverable modeEnter Bluetooth pairing (searching) modeUser’s phone is Bluetooth off modeUser’s phone set ...

Tires and wheels
✽ NOTICE It is permissible to add 3psi to the standard tire pressure specification if colder temperatures are expected soon. Tires typically loose 1psi for every 12°F temperature drop. If ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com