Inspection |
1. |
Remove the fuse box cover. |
2. |
Remove the starter relay (A). |
3. |
Using an ohmmeter, check that there is continuity between each terminal.
|
4. |
Apply 12V to terminal 85 and ground to terminal 86.
Check for continuity between terminals 30 and 87. |
5. |
If there is no continuity, replace the starter relay. |
6. |
Install the starter relay. |
7. |
Install the fuse box cover. |
AVN Remote Controller Schematic Diagrams
Circuit Diagram
...
General Information
Warning And Caution Labels
1. Radiator cap caution2. Fan caution3. Battery caution
Battery Caution Label
Warning / Caution Label (Cont'd)
A.Keep lighted cigarettes and all other flames or sp ...
Components and Components Location
Component Location
1. Fuel filler door open switch2. Fuel filler door release actuator
...