Removal and Installation |
1. |
Drain the coolant.
(Refer to Cooling System - "Coolant") |
2. |
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner") |
3. |
Disconnect the engine wiring connectors and harness protector on the surge tank.
|
4. |
Disconnect the PCSV hose (A), and the throttle body water hoses (B). |
5. |
Disconnect the PCV hose (A), and then remove the surge tank stay (B).
|
6. |
Remove the surge tank (A).
|
7. |
Installation is in the reverse order of removal. |
Body Control Module (BCM) Description and Operation
Description
Communication network diagram
AbbreviationExplanationC_CANChassis Controller Area NetworkB_CANBody Controller Area NetworkMM_CANMulti media Controller Area NetworkSMKSmart Key ECUDDM ...
Steering Column and Shaft Repair procedures
Replacement
1.
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
2.
Turn the steering wheel so that the front wheels can face straight ahead.
3 ...
Rear Seat Assembly Repair procedures
Replacement
1.
After loosening the mounting bolts, then remove the rear seat cushion assembly (A).
Tightening torque :
16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)
2.
Disconnect the r ...