Removal |
|
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad center fascia panel (A).
|
3. |
Remove the monitor (A) after loosening the mounting screws. |
4. |
Remove the AVN head unit (A) after loosening the mounting screws. |
5. |
Remove the AVN head unit connectors and cables.
|
6. |
Disconnect the connectors (A) and loosen the screws (4EA), then remove the Telematics unit (B). |
Installation |
1. |
Install the Telematics unit. |
2. |
Install the the AVN head unit and the monitor unit. |
3. |
Install the the crash pad center fascia panel. |
4. |
Connect the negative (-) battery terminal. |
Inspection |
1. |
After replacing the AVN, connect to "call center" by pushing the Blue Link button. |
2. |
If Blue Link service connected successfully, and then technician can hear the "Welcome to Hyundai Bluelink" sound.
|
Low tire pressure position telltale
When the tire pressure monitoring system warning indicators are illuminated,
one or more of your tires is significantly under-inflated. The low tire pressure
position telltale light will indicate ...
Radiator Components and Components Location
Components
1. Radiator2. Radiator mounting bracket3. Radiator cap4. Drain plug5. Mounting insulator
...
Voice Command List
• Common Commands: These commands can be used in most operations. (However a
few commands may not be available during certain operations)
FM/AM radio commands: available during FM, ...