Removal |
1. |
Remove the LH/RH cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover") |
2. |
Remove the lower oil pan.
(Refer to Lubrication System - "Oil Pan") |
3. |
Remove the drive belt auto tensioner.
(Refer to Timing System - "Drive Belt Tensioner") |
4. |
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pulley") |
5. |
Remove the engine mounting bracket.
(Refer to Engine And Transmission Assembly - "Engine Mounting") |
6. |
Lift up the engine assembly slightly by using a jack to get access to the side of engine. |
7. |
Remove the water pump and gasket.
(Refer to Cooling System - "Water Pump") |
8. |
Remove the timing chain cover (A).
|
Installation |
1. |
Install the timing chain cover.
|
2. |
Install the front oil seal.
(Refer to Timing System - "Front Oil Seal") |
3. |
Install the other parts reverse order of removal.
|
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description and Operation
Description
Overdrive clutch control solenoid valve(OD/C) is attached to
the valve body. This variable force solenoid valve directly controls the
hydraulic pressure inside the overdrive clutch. ...
Accelerator Position Sensor (APS) Specifications
Specification
AcceleratorPositionOutput Voltage (V)APS1APS2C.T0.7 ~ 0.80.29 ~ 0.46W.O.T3.85 ~ 4.351.93 ~ 2.18
...
Automatic-dimming function
Your mirror will automatically dim upon detecting glare from the vehicles traveling
behind you. The autodimming function can be controlled by the Dimming ON/OFF button:
1. Pressing and holding the b ...