1. Set the fan speed to the highest (extreme right) position.
2. Set the temperature to the extreme hot (HIGH) position.
3. Press the defroster button ().
4. The air conditioning will be turned on according to the detected ambient temperature
and outside (fresh) air position will be selected automatically.
If the position is selected, lower
fan speed is adjusted to a higher fan speed.
Air Cleaner Repair procedures
Removal and Installation
1.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
2.
Remove the engine cover.
3.
Remove the air duct (A).
4.
Remove the air cleaner asse ...
Rheostat Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the passenger compartment juction box cover.
3.
Remove the crash pad side switch assembly (A) by pushing it through ju ...
Cooling Fan Components and Components Location
Components
1. Cooling fan2. Fan motor3. Fan shroud
...