Inspection |
1. |
Turn ignition switch OFF. |
2. |
Disconnect the solenoid valve connector. |
3. |
Measure resistance between sensor signal terminal and sensor ground terminal. |
4. |
Check that the resistance is within the specification. |
Removal |
1. |
Remove the automatic transaxle assembly.
(Refer to Automatic Transaxle System - "Automatic Transaxle") |
2. |
Remove the air breeder hose (A). |
3. |
Remove the valve body cover (B).
|
4. |
Remove the bolt (3ea) after disconnecting the solenoid valve connector (B) and the oil temperature sensor connector (A).
|
5. |
Remove the solenoid valve support bracket (B) and the valve body mounting bolt (A-1ea).
|
6. |
Remove the torque converter control solenoid valve (A). |
Installation |
1. |
Installation is the reverse of removal.
|
Front Seat Belt Pretensioner Components and Components Location
Component Location
1. Front seat belt pretensioner
...
TPMS Receiver Description and Operation
Description
1.
Mode
(1)
Virgin State
A.
The receiver as a sole part is shipped in this state. Replacement parts should therefore arrive in this state.
B.
In this state, there is no Auto-L ...
Heated Steering wheel Description and Operation
Description
The grip is heated as painting heat paint on steering grip for driver convenience for winter
Heated control unit
Heated pad
Specifications
ItemSpecificationVoltage13.5 VHeated ...