Transaxle oil temperature sensor monitors the automatic
transaxle fluid's temperature and conveys the readings to TCM. It is an
Negative Thermal Coefficient(NTC) sensor whose resistance has an
inversely proportional relationship with the temperature level. Data
produced by this sensor is used to identify damper clutch activation and
deactivation zones within the low temperature and high temperature
range and to compensate hydraulic pressure levels during gear changes.
Inspection
Transaxle Control Module(TCM) Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector a ...
Specifications
? Type: Negative Thermal Coefficient(NTC) Type
Temp.[(°C)°F]Resistance (k?)(-40)-4048.1(-20)-4.015.6(0)32.05.88(20)68.02.51(40)104.01.11(60)140.00.61(80)176.00.32(100)212.00.18(12 ...
See also:
If engine does not turn over or turns over slowly
1. If your vehicle has an automatic transaxle, be sure the shift lever is in
N (Neutral) or P (Park) and the emergency brake is set.
2. Check the battery connections to be sure they are clean and ti ...
Lighting control
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of
the following positions:
(1) OFF position
(2) Park ...
Knock Sensor (KS) Schematic Diagrams
Circuit Diagram
...