Hyundai Azera: Trunk Lid Assembly Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Trunk Lid / Trunk Lid Assembly Repair procedures

Replacement

•	When removing and installing the trunk lid, an assistant is necessary.

•	Wear gloves to protect hands from injury.

1.	After loosening the mounting screws, then remove the trunk inside handle (A).

2.	Detach the clips, then remove the trunk lid trim (A).

3.	Detach the clips, then remove the trunk lid side cover (A).

4.	Disconnect wiring (B) and connectors.

5.

After loosening the mounting bolts, then remove the trunk lid (A).

Tightening torque :

6.9~8.8 N.m (0.7~0.9 kgf.m, 5.1~6.5 lb-ft)

6.

Installation is the reverse of removal.

•	Replace any damaged clips.

Trunk Lid Assembly Components and Components Location

Component Location 1. Trunk lid assembly ...

Trunk Lid Trim Components and Components Location

Component Location 1. Trunk lid trim ...

See also:

Headlight (Headlamp) welcome function
When the headlight is in the ON or AUTO position and all doors (and trunk) are closed and locked, if you press the door unlock button on the smart key, the headlights (and/or parking light) will com ...

Seat Heater Components and Components Location
Component Location ...

Removing and storing the spare tire
Turn the tire hold-down wing bolt counterclockwise. Store the tire in the reverse order of removal. To prevent the spare tire and tools from “rattling” while the vehicle is in motion, store them ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com