Hyundai Azera: Trunk Lid Trim Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Trunk Lid / Trunk Lid Trim Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

1.	After loosening the mounting screws, then remove the trunk inside handle (A).

2.	Detach the clips, then remove the trunk lid trim (A).

3.

Installation is the reverse of removal.

•	Replace any damaged clips.

Trunk Lid Trim Components and Components Location

Component Location 1. Trunk lid trim ...

Trunk Lid Latch Components and Components Location

Component Location 1. Trunk lid latch ...

See also:

Rear Back Armrest Cup Holder Repair procedures
Replacement • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and pan ...

Oil Cooler Repair procedures
Removal and Installation 1. Remove the radiator upper hose and lower hose. (Refer to Engine Mechanical System - "Radiator Hose") 2. Remove the cooling fan assembly. (Refer to Engine Mechani ...

On-board Refueling Vapor Recovery (ORVR) valve Description and Operation
Operation Normal status Full fuelVehicle Rollover / steepValve openValve closeValve close ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com