Removal |
1. |
Remove the LH/RH cylinder head assembly and gasket.
(Refer to Cylinder Head Assembly - "Cylinder Head") |
2. |
Remove the water jacket seperator (A). |
Installation |
1. |
Install the #1, #2 cylinder bore water jacket seperator (A).
|
2. |
Install the LH/RH cylinder head assembly and gasket.
(Refer to Cylinder Head Assembly - "Cylinder Head") |
Record your key number
The key code number is stamped on the key code tag attached to the key set. Should
you lose your keys, contact an authorized HYUNDAI dealer. Remove the key code tag
and store it in a safe place. A ...
Knock Sensor (KS) Specifications
Specification
ItemSpecificationCapacitance (pF)950 ~ 1,350Resistance (M?)4.87
...
Output Speed Sensor Troubleshooting
Signal Waveform
Fig 1) Input/Output speed sensor at low speed
Fig 2) Input/Output speed sensor at high speed ...