Removal |
1. |
Drain the coolant.
(Refer to Cooling System - "Coolant") |
2. |
Remove the drive belt.
(Refer to Timing System - "Drive Belt") |
3. |
Remove the water pump pulley (A). |
4. |
Remove the water pump (A) and gaskets (B). |
Installation |
1. |
Install the water pump (A) with the new gaskets (B).
|
2. |
Install the water pump pulley (A).
|
3. |
Install the drive belt.
(Refer to Timing System - "Drive Belt") |
4. |
Fill the radiator with coolant and check for leaks. |
Repair procedures
Service Point Target Auto Calibration (SPTAC)
This procedure provides a way to calibrate the camera by
having the service technician align the car to a well lit simulated
straight road target; ...
Rear Seat Belt Buckle Components and Components Location
Component Location
1. Rear seat belt buckle [LH]2. Rear seat belt buckle [RH]
...
Changing the engine oil and filter
Have engine oil and filter changed by an authorized HYUNDAI dealer according
to the Maintenance Schedule at the beginning of this section.
WARNING - California proposition 65
Engine oil contains ch ...