Hyundai Azera: Water Temperature Control Assembly Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Mechanical System / Cooling System / Water Temperature Control Assembly Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Mechanical System / Cooling System / Water Temperature Control Assembly Repair procedures
| Removal and Installation |
| 1. |
Remove the radiator upper hose and lower hose.
(Refer to Cooling System - "Radiator Hose") |
| 2. |
Disconnect the throttle body water hoses.
|
| 3. |
Disconnect the heater hoses.
(Refer to Cooling System - "Heater Hose") |
| 4. |
Disconnect the WTS & gauge unit connector (A)
|
| 5. |
Separate the engine wiring protector mounted on the water temperature control assembly.
|
| 6. |
Remove the water temperature control assembly (A) and the gaskets.
|
| 7. |
Install in the reverse order of removal. |
Water Temperature Control Assembly Components and Components Location
Components
1. Water temperature control assembly2. Throttle body water hose3. Gasket
...
Water Pipe Components and Components Location
Components
1. Water center pipe2. O-ring
...
See also:
Washer fluid
...
Fuel lines, fuel hoses and connections
Check the fuel lines, fuel hoses and connections for leakage and damage. Have
an authorized HYUNDAI dealer replace any damaged or leaking parts immediately. ...
Snow tires
If you equip your car with snow tires, they should be the same size and have
the same load capacity as the original tires. Snow tires should be installed on
all four wheels; otherwise, poor handling ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com