Inspection |
1. |
The windshield deicer switch inputs can be checked using the GDS. |
2. |
To check the input value of windshield deicer switch, select option "IPM". |
3. |
Select option "Current Data". |
4. |
To check the input value of windshield deicer switch in force mode, select option. |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the center fascia panel.
|
3. |
Remove the heater control unit (A) after removing screws. |
Installation |
1. |
Install the heater control unit. |
2. |
Install the center fascia panel. |
ESCL(Electronic Steering Column Lock) Repair procedures
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the steering column upper and lower shroud ...
Front Door Window Glass Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Remove the front door window glass mounting hole plug (B).
•
Use the door swi ...
Cylinder Head Repair procedures
Removal
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damaging the cylinder head, wait until the engine
coolant temperature drops below normal ...