Hyundai Equus Manuals

Hyundai Azera: Ambient Sensor Description and Operation - Air Conditioning System - Heating,Ventilation, Air Conditioning - Hyundai Azera 2011-2019 Service ManualHyundai Azera: Ambient Sensor Description and Operation

Description
1.
The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor resistance will increase with lower temperature, and decrease with higher temperatures.
2.
The sensor output will be used for discharge temperature control, temperature regulation door control, blower motor level control, mix mode control and in-car humidity control.
   
If the ambient temperature is below 0°C (32.0°F), the A/C compressor will be stopped.
The compressor will be operated by manual operating.
Photo Sensor Repair procedures
Inspection 1. Ignition "ON" 2. Using the scan tool. 3. Emit intensive light toward photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher ...

Ambient Sensor Repair procedures
Inspection 1. Ignition "OFF" 2. Disconnect ambient temperature sensor. 3. Check the resistance of ambient temperature sensor between terminals 1 and 2 whether it is changed by changing ...

See also:

Radiator Hose Repair procedures
Removal and Installation 1. Remove the battery and tray. (Refer to Engine Electrical System - "Battery") 2. Remove the air duct and air cleaner assembly. (Refer to Intake And Exhaust Syste ...

Intake Actuator Description and Operation
Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit. 3. Pressing the intake selection switch will shift between re ...

Components and Components Location
Components 1. Sub frame2. Lower arm3. Front disk4. Drive shaft5. Steering gearbox6. Front stabilizer bar7. Front strut assembly8. Front stabilizer bar link ...

Categories

Hyundai Azera Manuals

© 2011-2019 Copyright www.hgmanual.com