Your mirror will automatically dim upon detecting glare from the vehicles traveling behind you. The autodimming function can be controlled by the Dimming ON/OFF button:
1. Pressing and holding the button for 3 seconds turns the autodimming function
OFF which is indicated by the green Status Indicator LED turning off.
2. Pressing and holding the button for 3 seconds again turns the auto-dimming function
ON which is indicated by the green Status Indicator LED turning on.
The mirror defaults to the ON position each time the vehicle is started.
Z-Nav™ Compass Display
The NVS™ Mirror in your vehicle is also equipped with a Z-Nav™ Compass that shows the vehicle Compass heading in the Display Window using the 8 basic cardinal headings (N, NE, E, SE, etc.).
Master Cylinder Repair procedures
Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the air duct (B) and air cleaner assembly (A).
3.
Disconnect the brake fluid level switch conne ...
Fuel Tank Pressure Sensor (FTPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification: Refer to "Specification"
Removal
1.
Turn the ignition swit ...
Integrated HomeLink® Wireless Control System
The HomeLink® Wireless Control System provides a convenient way to replace up
to three hand-held radiofrequency (RF) transmitters with a single built-in device.
This innovative feature will learn th ...