Hyundai Equus Manuals

Hyundai Azera: Drive Plate Repair procedures - Cylinder Block - Engine Mechanical System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Drive Plate Repair procedures

Removal and Installation
1.
Remove the automatic transaxle.
2.
Remove the adapter plate (B) and the drive plate (A).

Tightening torque :
71.6 ~ 75.5N.m (7.3 ~ 7.7kgf.m, 52.8 ~ 55.7lb-ft)

3.
Install in the reverse order of removal.
Drive Plate Components and Components Location
Components 1. Drive plate2. Adapter plate ...

Rear Oil Seal Components and Components Location
Components 1. Rear oil seal2. Oil seal case ...

See also:

A/C Pressure Transducer Components and Components Location
Component Location ...

Components and Components Location
Components 1. Front pillar trim2. Center pillar upper trim3. Rear pillar trim4. Cowl side trim5. Center pillar lower trim6. Front door scuff trim7. Rear door scuff trim ...

Delivery Pipe Repair procedures
Removal     In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure f ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com