Hyundai Azera: Emission Control System

Smart Cruise Control Switch Repair procedures

Removal and Installation 1. Disconnect the negative battery cable. 2. Disconnect the driver air bag module. (Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring") 3. Remove ...

General Information

...

See also:

Closing the hood
1. Before closing the hood, check the following: All filler caps in engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the engi ...

2. Evaporative emission control (including ORVR: Onboard Refueling Vapor Recovery) system
The Evaporative Emission Control System is designed to prevent fuel vapors from escaping into the atmosphere. (The ORVR system is designed to allow the vapors from the fuel tank to be loaded into a ...

Front Impact Sensor (FIS) Description and Operation
Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...