Hyundai Equus Manuals

Hyundai Azera: Engine Cover Repair procedures - Engine And Transmission Assembly - Engine Mechanical System - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Engine Cover Repair procedures

Removal and Installation
1.
Remove the engine cover (A).

   
•
Lift up the lower end of engine cover, then left and right alternately.
•
When installing, confirm that the mounting rubber insulators has been installed.
2.
Installation is reverse order of removal
Engine Cover Components and Components Location
Components Location 1. Engine cover ...

Engine Room Under Cover Components and Components Location
Components 1. Engine room front under cover2. Engine room RH Under cover3. Engine room LH Under cover ...

See also:

Barometric Pressure Sensor (BPS) Specifications
Specification Pressure [kPa (kgf/cm?, psi)]Output Voltage (V)10.0 (0.01, 0.15)0.5055.0 (0.56, 7.98)2.21100.0 (1.01, 14.5)3.93115.0 (1.17, 16.9)4.50 ...

Front Fog Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 3. Disconnect the front fog lamp connector. 4. Replace the ...

Components and Components Location
Components Location 1. ECM (Engine Control Module)2. Barometric Pressure Sensor (BPS)3. Manifold Absolute Pressure Sensor (MAPS)4. Intake Air Temperature Sensor (IATS)5. Engine Coolant Temperatur ...

Categories

Hyundai Azera Manuals

© 2011-2026 Copyright www.hgmanual.com