Hyundai Azera: Rear Body Body Repair
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Body (Interior and Exterior) / Body Dimensions / Rear Body Body Repair
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Body (Interior and Exterior) / Body Dimensions / Rear Body Body Repair
|
|
|
| Roof panel rear corner | Side outer panel rear corner | Rear package tray trim mounting hole (O12) |
|
|
|
| Side outer panel rear corner | Rear combination lamp mounting hole (8.5X8.5) | Rear bumper mounting hole (14X12) |
| ||
| Rear bumper mounting hole (14X12) |
Interior Body Repair
Interior A
Front pillar trim mounting hole (O8.5) Curtain airbag mounting hole (O6.6) Cowl crossbar mounting hole (O9) Front door checker mounting hole (O13)Cowl side trim mounting hole (6.5X18) ...
Under Body Body Repair
Projected Dimensions
Front side member tooling hole (O25) Side cover mounting hole (O9) Side cover mounting hole (O9) Front subframe mounting boltFront subframe mounting hole (O18) Front subfram ...
See also:
Transaxle Oil Temperature Sensor Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
Output Speed Sensor Specifications
Specifications
? Type: Hall effect sensor
Operation condition [°C(°F)](-40~150) -40~302Air gap(mm)in.(0.8~1.25) 0.032~0.049Output voltageHigh1.18~1.68Low0.59~0.84
...
Side Airbag (SAB) Module Repair procedures
Removal
Front Side Airbag
1.
Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
2.
Remove the front seat assembly.
(Refer to Body - "Front seat as ...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com