Hyundai Azera: Output Speed Sensor Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Specifications
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Specifications
| Specifications |
? Type: Hall effect sensor
| Operation condition [°C(°F)] | (-40~150) -40~302 | |
| Air gap(mm)in. | (0.8~1.25) 0.032~0.049 | |
| Output voltage | High | 1.18~1.68 |
| Low | 0.59~0.84 | |
Output Speed Sensor Description and Operation
Description
The output speed sensor is a vital unit that measures the
rate of rotation of the transaxle's turbine shaft and output shaft, and
delivers the readings to the Transaxle Control Modu ...
Output Speed Sensor Schematic Diagrams
Circuit Diagram
...
See also:
Smart key receiver Repair procedures
Removal
RF Receiver
-
Take care not to scratch the crash pad and related parts
1.
Disconnect the negative(-) battery terminal.
2.
Remove the rear seat.
(Refer to ...
Front Door Inside Handle Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
After loosening the mounting screws, then remove the front door inside handle (A).
3.
Installation ...
Crash Pad Lower Panel Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com