Hyundai Azera: Trunk Trim Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Trunk Trim / Trunk Trim Repair procedures

Replacement

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

•	Put on gloves to protect your hands.

1.	Remove the trunk trim.

2.

Installation is the reverse of removal.

•	Replace any damaged clips.

1. Luggage side trim [LH]
2. Luggage side trim [RH]
3. Rear transverse trim
4. Luggage covering complete

5. Luggage partition panel
6. Luggage partition side trim [RH]
7. Luggage partition side trim [LH]
8. Package tray trim

Trunk Trim

...

Windshield Glass

...

See also:

Cylinder Head Components and Components Location
Components 1. RH Cylinder head2. RH Cylinder head gasket3. LH Cylinder head4. LH Cylinder head gasket5. Cylinder block 1. Camshaft bearing cap 2. Camshaft thrust bearing cap 3. RH Exhaust ca ...

Side Sill Molding Repair procedures
Replacement • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Put ...

Barometric Pressure Sensor (BPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the BPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com