Hyundai Azera: Smart key unit Schematic Diagrams

Smart key unit Components and Components Location

Component (1) Connector Pin Information PinConnector AConnector BConnector CConnector D1Power GND1ACCRF dataAntenna power - LH2Power GND2IGN2C CAN lowAntenna power - RH3-Stop lamp fuseB CAN lowAnt ...

Smart key unit Repair procedures

Removal     - Take care not to scratch the crash pad and related parts Smart key unit 1. Disconnect the negative (-) battery terminal. 2. Remove the accelerator pedal ...

See also:

Engine Hanger Repair procedures
Removal and Installation [Front engine hanger] 1. Remove the front engine hanger (A) Tightening torque: 44.1 ~ 53.6N.m (4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft) 2. Install in the reverse ord ...

Front Driveshaft Repair procedures
Replacement 1. Loosen the wheel lug nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque: 88. ...

Troubleshooting
Troubleshooting SymptomSuspect areaEngine will not start or stuggle to startVapor hose damaged or disconnectedEngine stuggle to startMalfunction of the Purge Control Solenoid ValveRough idle or e ...