Hyundai Azera: Buzzer Repair procedures
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Body Electrical System / Smart key System / Buzzer Repair procedures
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Service Manual / Body Electrical System / Smart key System / Buzzer Repair procedures
| Removal |
Buzzer
| 1. |
Disconnect the negative(-) battery terminal. |
| 2. |
Remove the front left wheel guard. |
| 3. |
Remove the external buzzer (A) after disconnecting the connector.
|
| Installation |
Buzzer
| 1. |
Install the buzzer. |
| 2. |
Install the front left wheel guard. |
| 3. |
Install the negative (-) battery terminal and check the smart key system. |
Smart key receiver Repair procedures
Removal
RF Receiver
-
Take care not to scratch the crash pad and related parts
1.
Disconnect the negative(-) battery terminal.
2.
Remove the rear seat.
(Refer to ...
See also:
Passenger Airbag (PAB) Module Description and Operation
Description
Passenger Airbag (PAB) module is located in the passenger
crash pad. This PAB contains 2 firing squibs of airbag and 1 firing
squib of active vent. Depending of crash speed or the t ...
Center Pillar Trim Components and Components Location
Component Location
1. Center pillar lower trim2. Center pillar upper trim
...
Oil Pump Repair procedures
Removal
1.
Remove the lower oil pan.
(Refer to Lubrication System - "Oil Pan")
2.
Remove the oil pump chain cover (A).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
...
Categories
Hyundai Azera Manuals
© 2011-2026 Copyright www.hgmanual.com